NETGEAR GS108T-200NAS Software Administration Manual page 141

Figure 3-38
To configure a static MAC address:
1. To add a static MAC address entry
a. Select the VLAN ID corresponding to the MAC address to add.
b. Specify the MAC address to add.
c. Specify the port associated with the MAC address.
d. Click Add.
2. To delete a static MAC address, select the check box next to the entry and click Delete.
3. To modify the settings for a static MAC address, select the check box next to the entry, update
the desired values, and click Apply.
4. Click Refresh to reload the page and display the latest MAC address learned on a specific
port.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Configuring Switching Information
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
3-57