Table of Contents
Advertisement
•
Boot Code: The boot code used to automatically boot the system.
•
SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM
Encoded).
•
SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded).
•
SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak Encryption
Parameter File (PEM Encoded).
•
SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded).
2. If you are downloading a GS108T or GS110TP image (Code), select the image on the switch
to overwrite. This field is only visible when Code is selected as the File Type.I
Note: It is recommended that you not overwrite the active image. The system will
display a warning that you are trying to overwrite the active image.
3. From the Server Address Type filed, specify the format for the address you type in the TFTP
Server Address field
•
IPv4. Indicates the TFTP server address is an IP address in dotted-decimal format.
•
DNS. Indicates the TFTP server address is a hostname.
4. In the Server Address field, specify the IP address or hostname of the TFTP server. The
address you type must be in the format indicated by the TFTP Server Address Type.
5. In the Transfer File Path field, specify the path on the TFTP server where the file is located.
You may enter up to 32 characters. Include the backslash at the end of the path. A path name
with a space is not accepted. Leave this field blank to save the file to the root TFTP directory.
6. In the Remote File Name field, specify the name of the file to download from the TFTP
server. You may enter up to 32 characters. A file name with a space is not accepted.
7. Select the Start File Transfer check box to initiate the file upload.
8. Click Apply to begin the file transfer.
The last row of the table displays information about the progress of the file transfer. The page
refreshes automatically until the file transfer completes or fails.
To activate a software image that you download to the switch, see
page
7-9.
Maintenance
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
"File Management" on
7-7
Hide quick links:
Advertisement
Table of Contents
