Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
Figure 2-1
To define system information:
1. Open the System Information page.
2. Define the following fields:
•
System Name. Enter the name you want to use to identify this switch. You may use up to
31 alphanumeric characters. The factory default is blank.
•
System Location. Enter the location of this switch. You may use up to 31 alphanumeric
characters. The factory default is blank.
•
System Contact. Enter the contact person for this switch. You may use up to 31
alphanumeric characters. The factory default is blank.
3. Click Apply.
The system parameters are applied, and the device is updated.
2-2
v1.0, April 2010
Configuring System Information
Hide quick links:
Advertisement
Table of Contents
