NETGEAR GS108T-200NAS Software Administration Manual page 160

GS108T and GS110TP Smart Switch Software Administration Manual
Figure 4-10
To configure a DiffServ policy:
1. To create a new policy, enter a policy name in the Policy Selector field, select the existing
DiffServ class to associate with the policy, and click Add.
The available policy type is In, which indicates the type is specific to inbound traffic. This
field is not configurable.
2. To rename an existing policy or add a new member class to the policy, select the check box
next to the configured class, update the fields, and click Apply.
3. To remove a policy, click the check box beside the policy, then click Delete.
4. Click Refresh to refresh the page with the most current data from the switch.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch. After creating a Class, click the class link to the Class page.
To configure the policy attributes:
1. Click the name of the policy.
4-18
v1.0, April 2010
Configuring Quality of Service