NETGEAR GS108T-200NAS Software Administration Manual page 251

Figure 6-9
The following table describes the Event Log information displayed on the screen.
Table 6-8. Event Log Fields
Field
Entry
Type
Filename
Line
Task ID
Code
Time
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear to clear the messages out of the Event Log.
• Click Refresh to refresh the data on the screen and display the most current information.
Monitoring the System
GS108T and GS110TP Smart Switch Software Administration Manual
Description
The number of the entry within the event log. The most recent entry is first.
Specifies the type of entry.
The GS108T or GS110TP source code filename identifying the code that
detected the event.
The line number within the source file of the code that detected the event.
The OS-assigned ID of the task reporting the event.
The event code passed to the event log handler by the code reporting the
event.
The time the event occurred, measured from the previous reset.
v1.0, April 2010
6-23