NETGEAR GS108T-200NAS Software Administration Manual page 117

• VLAN ID. The menu contains all VLANs configured on the switch. Select a VLAN to
associate with the MST instance.
2. To delete an MST instance, select the check box next to the instance and click Delete.
3. To modify an MST instance, select the check box next to the instance to configure, update the
values, and click Apply. You can select multiple check boxes to apply the same setting to all
selected ports.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
For each configured instance, the information described in the following table displays on the
page.
Table 3-5. Spanning Tree MST Status
Field Description
Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the bridge priority
and the base MAC address of the bridge.
Time Since Displays the total amount of time since the topology of the selected MST instance last
Topology changed. The time is displayed in hour/minute/second format, for example, 5 hours, 10
Change minutes, and 4 seconds.
Topology Displays the total number of times topology has changed for the selected MST instance.
Change Count
Topology Indicates whether a topology change is in progress on any port assigned to the selected
Change MST instance. The possible values are True or False.
Designated Displays the bridge identifier of the root bridge, which is made up from the bridge priority
Root and the base MAC address of the bridge.
Root Path Cost Displays the path cost to the Designated Root for this MST instance.
Root Port Indicates the port to access the Designated Root for this MST instance.
Configuring Switching Information
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
3-33