NETGEAR GS108T-200NAS Software Administration Manual page 197

• Aborting
• Held
• ForceAuthorized
• ForceUnauthorized
• Backend State. This field displays the current state of the backend authentication state
machine. Possible values are as follows:
• Request
• Response
• Success
• Fail
• Timeout
• Initialize
• Idle
• EAPOL Flood Mode. This field is used to enable or disable the EAPOL Flood mode per
Interface.The default value is Disable.
3. Click Apply to send the updated screen to the switch and cause the changes to occur on the
switch and the changes will be saved.
4. Click Initialize to begin the initialization sequence on the selected port(s). This button is only
selectable if the control mode is auto. If the button is not selectable, it will be grayed out.
When this button is clicked, the action is immediate. It is not required to click Apply for the
action to occur.
5. Click Reauthenticate to begin the reauthentication sequence on the selected port. This button
is only selectable if the control mode is auto. If the button is not selectable, it will be grayed
out. When this button is pressed, the action is immediate. It is not required to click Apply for
the action to occur.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
5-29