Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
Figure 5-13
Before you create access rules, make sure:
•
An access profile exists.
•
The access profile is deactivated.
To configure access profile rules:
1. To add an access profile rule, configure the following settings and click Add.
•
Rule Type: Specify whether the rule permits or denies access to the GS108T or GS110TP
management interface.
•
Select Permit to allow access to the management interface for traffic that meets the
criteria you configure for the rule. Any traffic that does not meet the rules is denied.
•
Select Deny to prohibit access to the management interface for traffic that meets the
criteria you configure for the rule. Any traffic that does not meet the rules is allowed
access to the switch. Unlike MAC ACLs and IP ACLs, there is no implied deny all
rule at the end of the rule list.
•
Service Type. Select the type of service to allow or prohibit from accessing the switch
management interface:
•
SNMP
•
HTTP
•
HTTPS
5-22
v1.0, April 2010
Managing Device Security
Hide quick links:
Advertisement
Table of Contents
