Table of Contents
Advertisement
Figure 5-22
To configure port security settings:
1. To configure port security settings for a physical port, click PORTS.
2. To configure port security settings for a Link Aggregation Group (LAG), click LAGS.
3. To configure port security settings for both physical ports and LAGs, click ALL.
4. Select the check box next to the port or LAG to configure. Select multiple check boxes to
apply the same setting to all selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
5. Specify the following settings:
•
Port Security. Enable or Disable the port security feature for the selected port.
•
Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically
learned MAC addresses on the selected interface. Valid range is 0–600.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
5-39
Hide quick links:
Advertisement
Table of Contents
