Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
Note: You can also access the LLDP Configuration page by clicking System LLDP
Advanced LLDP Configuration.
Figure 2-18
To configure global LLDP settings:
1. Configure the following LLDP properties.
•
TLV Advertised Interval. Specify the interval at which frames are transmitted. The
default is 30 seconds, and the valid range is 1–32768 seconds.
•
Hold Multiplier. Specify multiplier on the transmit interval to assign to Time-to-Live
(TTL). The default is 4, and the range is 2–10.
•
Reinitializing Delay. Specify the delay before a reinitialization. The default is 2 seconds,
and the range is 1–10 seconds.
•
Transmit Delay. Specify the interval for the transmission of notifications. The default is 5
seconds, and the range is 5–3600 seconds.
2-32
v1.0, April 2010
Configuring System Information
Hide quick links:
Advertisement
Table of Contents
