NETGEAR GS108T-200NAS Software Administration Manual page 179

To configure global TACACS+ settings:
1. In the Key String field, specify the authentication and encryption key for TACACS+
communications between the GS108T or GS110TP and the TACACS+ server. The valid range
is 0–128 characters. The key must match the key configured on the TACACS+ server.
2. In the Connection Timeout field, specify the maximum number of seconds allowed to
establish a TCP connection between the GS108T or GS110TP and the TACACS+ server. The
valid range is 1–30 seconds.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make any changes to the page, click Apply to apply the new settings to the system.
TACACS+ Server Configuration
Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with
which the switch can communicate.
To display the TACACS+ Server Configuration page, click Security  Management Security,
and then click the TACACS+  Server Configuration link.
Figure 5-6
To configure TACACS+ server settings:
1. To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the IP
address of the server to add, and click Apply.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
5-11