NETGEAR GS108T-200NAS Software Administration Manual page 136

GS108T and GS110TP Smart Switch Software Administration Manual
• Disabled. Upon seeing another querier of the same version in the VLAN, the
snooping querier moves to the non-querier state.
• Enabled. The snooping querier participates in querier election, in which the least IP
address operates as the querier in that VLAN. The other querier moves to non-querier
state.
• Snooping Querier VLAN Address. Specify the Snooping Querier IP Address to be used
as the source address in periodic IGMP queries sent on the specified VLAN.
2. Click Apply to apply the new settings to the switch. Configuration changes take effect
immediately
3. To disable Snooping Querier on a VLAN, select the VLAN ID and click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. Click Refresh to update the page with the latest information from the switch.
IGMP Snooping Querier VLAN Status
Use this page to view the operational state and other information for IGMP snooping queriers for
VLANs on the network.
To access this page, click Switching Multicast  IGMP Snooping Querier  Querier VLAN
Status.
Figure 3-35
3-52
v1.0, April 2010
Configuring Switching Information