Table of Contents
Advertisement
RADIUS Server Configuration
Use the RADIUS Server Configuration page to view and configure various settings for the current
RADIUS server configured on the system.
To access the RADIUS Server Configuration page, click Security Management Security, and
then click the RADIUS Server Configuration link.
Figure 5-3
To configure a RADIUS server:
1. To add a RADIUS server, specify the settings the following list describes, and click Add.
•
In the Server Address field, specify the IP address of the RADIUS server to add.
•
In the Authentication Port field, specify the UDP port number the server uses to verify
the RADIUS server authentication. The valid range is 0–65535.
•
From the Secret Configured menu, select Yes to add a RADIUS secret in the next field.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS server, this field indicates whether the shared secret for this server has been
configured.
•
In the Secret field, type the shared secret text string used for authenticating and encrypting
all RADIUS communications between the switch and the RADIUS server. This secret
must match the RADIUS encryption.
•
From the Active menu, specify whether the server is a Primary or Secondary server.
•
From the Message Authenticator menu, enable or disable the message authenticator
attribute for the selected server.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
5-5
Hide quick links:
Advertisement
Table of Contents
