Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
Figure 3-1
To configure port settings:
1. To configure settings for a physical port, click PORTS.
2. To configure settings for a Link Aggregation Group (LAG), click LAGS.
3. To configure settings for both physical ports and LAGs, click ALL.
4. Select the check box next to the port or LAG to configure. You can select multiple ports and
LAGs to apply the same setting to the selected interfaces. Select the check box in the heading
row to apply the same settings to all interfaces.
5. Configure or view the settings:
•
Description. Enter the description string to be attached to a port. The string can be up to
64 characters in length.
•
Port Type. For most ports this field is blank. Otherwise, the possible values are:
•
MON: Indicates that the port is a monitoring port. For additional information about
port monitoring see
•
LAG: Indicates that the port is a member of a Link Aggregation trunk. For more
information see
•
Admin Mode. Use the menu to select the port control administration state, which can be
one of the following:
•
Enable: The port can participate in the network (default).
•
Disable: The port is administratively down and does not participate in the network.
3-2
"Port Mirroring" on page
"Link Aggregation Groups" on page
v1.0, April 2010
6-24.
3-5.
Configuring Switching Information
Hide quick links:
Advertisement
Table of Contents
