Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
Figure 3-28
To configure IGMP Snooping interface settings:
1. To configure IGMP Snooping settings for a physical port, click PORTS.
2. To configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS.
3. To configure IGMP Snooping settings for both physical ports and LAGs, click ALL.
4. Select the check box next to the port or LAG to configure. You can select multiple ports and
LAGs to apply the same setting to the selected interfaces. Select the check box in the heading
row to apply the same settings to all interfaces.
5. Configure the IGMP Snooping values for the selected port(s) or LAG(s):
•
Admin Mode. Select the interface mode for the selected interface for IGMP Snooping for
the switch from the menu. The default is Disable.
3-42
v1.0, April 2010
Configuring Switching Information
Hide quick links:
Advertisement
Table of Contents
