•
InitTTL. Specify the initial time-to-live for a packet in number of hops. The valid range is
0– 255.
•
MaxFail. Specify the maximum number of failures allowed in the session. The valid
range is 0–255.
•
Interval. Specify the time between probes in seconds. The valid range is 1–60.
•
Port. Specify the UDP destination port in probe packets. The valid range is 1–65535.
•
Size. Specify the size of probe packets. The valid range is 0–65507.
3. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
4. Click Apply to initiate the traceroute. The results display in the TraceRoute area.
Maintenance
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
7-15