Clearing And Displaying Bfd Counters - Cisco ASR 9000 Series Configuration Manual

Clearing and Displaying BFD Counters

Command or Action
Step 4
ipv6 checksum [disable]
Example:
RP/0/RSP0/CPU0:router(config-bfd-if)# ipv6
checksum
Step 5
commit
Clearing and Displaying BFD Counters
The following procedure describes how to display and clear BFD packet counters. You can clear packet
counters for BFD sessions that are hosted on a specific node or on a specific interface.
SUMMARY STEPS
1. show bfd counters[ ipv4 | all] packet interface type interface-path-id] location node-id
2. clear bfd counters [ ipv4 | ipv6 |all] packet [interface type interface-path-id] location node-id
3. show bfd counters [ [ipv4 | ipv6 | all] packet [interface type interface-path-id] location node-id
DETAILED STEPS
Command or Action
Step 1 show bfd counters[ ipv4 | all] packet interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router#show bfd counters all packet location
0/3/cpu0
Step 2 clear bfd counters [ ipv4 | ipv6 |all] packet [interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router# clear bfd counters all packet
location 0/3/cpu0
Step 3 show bfd counters [ [ipv4 | ipv6 | all] packet [interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router# show bfd counters all packet
location 0/3/cpu0
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
218
Purpose
Enables IPv6 checksum support on the interface. To
disable, use the disable keyword.
Purpose
Displays the BFD counters for IPv4 packets, IPv6
packets, or all packets.
Clears the BFD counters for IPv4 packets, IPv6
packets, or all packets.
Verifies that the BFD counters for IPv4 packets,
IPv6 packets, or all packets have been cleared.
Implementing BFD
OL-30423-03