Cloning Zones, Zone Sets, Fc Aliases, And Zone Attribute Groups - Cisco Nexus 5500 Series NX-OS Configuration Manual

Zone Set Duplication
Step 2
Step 3
Step 4
Step 5
Step 6

Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups

You can clone a zone, zone set, fcalias, or zone-attribute-group.
Procedure
Step 1
Step 2
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
144
Command or Action
zoneset rename oldname newname vsan vsan-id
Example:
switch(config)# zoneset rename test myzoneset
vsan 60
zone rename oldname newname vsan vsan-id
Example:
switch(config)# zone rename test myzone vsan
50
fcalias rename oldname newname vsan vsan-id
Example:
switch(config)# fcalias rename test myfc vsan
200
zone-attribute-group rename oldname newname vsan
vsan-id
Example:
switch(config)# zone-attribute-group rename
test mygroup vsan 12
zoneset activate name newname vsan vsan-id
Example:
switch(config)# zoneset activate name myzone
vsan 50
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
zoneset clone oldname newname vsan vsan-id
Example:
switch(config)# zoneset clone test myzoneset2
vsan 2
Configuring and Managing Zones
Purpose
Renames a zone set in the specified
VSAN.
Renames a zone in the specified
VSAN.
Renames a fcalias in the specified
VSAN.
Renames a zone attribute group in the
specified VSAN.
Activates the zone set and updates the
new zone name in the active zone set.
Purpose
Enters global configuration mode.
Clones a zone set in the specified
VSAN.
OL-30895-01