Fujitsu 6010N - fi - Document Scanner Operator's Manual page 518

ATTENTION
HINT
480
Carbonless paper contains chemical substances that may damage the pad
assy or the pick and other rollers when documents are fed. Pay attention to
the following:
Cleaning:
If pick errors occur frequently, clean the pad assy and pick roller.
For details on cleaning the pad assy and pick roller, refer to
Scanner Care" (page
Replacing parts:
The service life of the pad assy and pick roller may be shortened when
compared to scanning only wood containing paper documents.
When wood containing paper manuscripts are scanned, the life of the pad
assy and pick roller may be shortened compared with the case where
woodfree paper manuscripts are scanned.
When scanning photographs, the face of the photograph may become
damaged.
When scanning semi-transparent documents, set the scan [Brightness] to
"Light" to avoid image bleed through.
To prevent the rollers from becoming dirty, avoid scanning documents con-
taining large areas written or filled in with pencil. If scanning of such docu-
ments is unavoidable, clean the rollers frequently.
To operate correctly, the ADF requires the leading edges of all document
sheets be evenly aligned. Make sure that curling of the leading edge is
within the following tolerances:
Less than 3mm
Less than 5mm
423).
More than
30mm
Feed direction
Leading edge Side being
of document scanned
More than
30mm
Feed direction
Side being
Leading edge
scanned
of document
"Chapter 7