Replacing The Pick Roller - Fujitsu 6010N - fi - Document Scanner Operator's Manual

Network scanner
Hide thumbs Also See for 6010N - fi - Document Scanner:
Table of Contents

Advertisement

5. Close the top cover.
You should hear a click when it is returned to its original position.
ATTENTION
6. Reset the pad assy usage counter.
The usage counter must be reset by an administrator. For details, refer to
Usage Counter" (page

7.6.4 Replacing the Pick Roller

1. Remove any documents from the ADF paper chute.
2. Remove the ADF paper chute.
3. Push the ADF release button, then hold both sides of the top cover and lift it open.
ATTENTION
440
Be careful that the top cover does not shut on your fingers.
157).
Be careful that the top cover does not shut on your fingers.
"Resetting the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scansnap iscanner fi-6010n

Table of Contents