Filter Conditions; [Clear All Errors] Button - Fujitsu 6010N - fi - Document Scanner Operator's Manual

■ Filter Conditions

Filters the scanners displayed in the scanner list.
Scanner Name
Enter a part of or entire scanner name of the scanner to be filtered.
This may be up to 15 characters long.
IP Address
Enter a part of or entire IP address of the scanner to be filtered.
This may be up to 15 characters long.
Settings Group
Select the settings group of the scanner to be filtered.
The default is "(All)".
Add-in Group
Select the Add-in group of the scanner to be filtered.
The default is "(All)".
Comment
Enter the description of the scanner to be filtered.
Status
Select the operating status of the scanner to be filtered.
The default is "(All)".
[Apply] button
Apply the entered filter conditions and refresh the list.

■ [Clear All Errors] Button

Clear all error marks
If there are multiple pages of scanner operating status, the status of all error marked scanners are
cleared.
5.14 Viewing the Scanners Operating Status
shown on the "Scanner Operation Monitor" window.
fi-6010N Network Scanner Operator's Guide
5
283