Fujitsu 6010N - fi - Document Scanner Operator's Manual page 177

8. For "Authentication", specify whether or not to save the entered "User Name" and
"Password".
When the [Remember] button is selected, the "User Name" and "Password" are saved.
The "User Name" and "Password" saved for authentication are used on the regular user
screen.
When the [Each Time] button is selected, the "User Name" and "Password" are not saved.
When selecting a network folder initially, authentication is required on the regular user
screen. However, if the user is registered in the LDAP server, and the LDAP user name and
password can be used for authentication, the authentication screen will not appear even if the
[Each Time] button is selected.
9. For "Protocol", specify how to access the FTP server.
The default value is "FTP".
When the [FTP] button is selected, the FTP server will be connected without SSL encryp-
tion.
When the [FTPS] button is selected, the FTP server will be connected through SSL encryp-
tion.
10. Set a "Port Number" for the FTP server.
The default number is 21. Numbers from 1 to 65535 can be set.
11. For "Passive Mode", specify whether or not to access in passive mode.
The default value is "On".
"Passive Mode" can be selected only when the [FTP] button is selected in
When the [On] button is selected, the FTP server is connected in passive mode.
When the [Off] button is selected, the FTP server is connected in active mode.
When the [FTPS] button is selected in
12. For "Encryption", specify the type of encryption.
"Encryption" can be selected when the [FTPS] button is selected in
When the [Explicit] button is selected, the FTP server will be connected without SSL
encryption, and encryption will start before user name and password are authenticated.
When the [Implicit] button is selected, SSL encryption will work when the FTP server con-
nection is started.
13. For "Proxy", specify whether or not a proxy server is to be used.
The "Proxy" setting is only available when a proxy server has been set on the "Proxy Server"
screen. For details about proxy server settings, refer to
(page 98).
When the [ON] button is selected, the FTP connection is via the proxy server specified on
the "Proxy Server" screen.
When the [OFF] button is selected, the FTP server is connected to directly, without using the
proxy server.
4.7 Using the Network Settings Menus
Step 9, the FTP server is connected in passive mode.
"4.7.7 Setting the Proxy Server"
fi-6010N Network Scanner Operator's Guide
Step 9.
Step 9.
139
4