Screen Settings; Ldap Server - Fujitsu 6010N - fi - Document Scanner Operator's Manual

Maximum Connections
Select the maximum number of scanners that can be connected simultaneously to the Central
Admin Server.
The default is "10".
Wake-On-LAN
Configures the Wake-On-LAN settings to start the scanner to be controlled from the Central
Admin Server.
Port Number
Enter the port number to be used to send magic packet for Wake-On-LAN.
The default is "443". The value can be specified within the range of 1 to 65535.
# Tries
Select the number of times magic packet is sent for Wake-On-LAN.
The default is "3".
Interval
Select the interval for sending magic packet for Wake-On-LAN.
The default is "1" sec.

■ Screen Settings

These settings are for the Central Admin Console main windows.
Default Screen
Select the main window ("Scanner Admin Operations" or "Scanner Operation Monitor" win-
dow) to be shown after a Central Admin Console login.
Screen Refresh Interval
Enter the interval in seconds, in which to automatically refresh the "Scanner Admin Opera-
tions" window and "Scanner Operating Monitor" window displays.
The default is 60 seconds.

■ LDAP Server

Configures the LDAP server used for the "Job Mode Settings" window displayed by selecting the
[Job Mode Settings] link on the "Scanner Admin Operations" window in the Central Admin Con-
sole.
Enable LDAP searches
Select this checkbox to enable LDAP searches.
If the checkbox is not selected, the following items cannot be entered.
LDAP Server Type
Select the type of the LDAP server to be connected.
Use SSL
Select the checkbox to use SSL to communicate with the LDAP server.
Certificate Only, CA not validated
Select this checkbox to validate the server certificate but not the certification path (certifi-
cate authority).
LDAP Server
Enter the LDAP server IP address, host name, or FQDN.
This may be up to 255 characters long.
5.6 Setting the Central Admin Server
fi-6010N Network Scanner Operator's Guide
5
247