Fujitsu 6010N - fi - Document Scanner Operator's Manual page 504

No.
5 In Internet Explorer, in the
"Tools" menu, "Internet
Options", [Security] tab, the
security level for the corre-
sponding zone is set as "High",
or in [Custom level], "Script-
ing", "Active scripting" is set
to "Prompt" or "Disable".
6 The scanner is in standby
mode.
7 A proxy server is being used.
8 There is an error with the con-
nection protocol setting.
9 There is an error with the port
number setting.
466
Problem
When connecting using the scanner name, the connec-
tion will be an intranet connection. When connecting
using an IP address, it will be an internet connection.
If the URL includes a scanner name, the scanner will
be connected using an Intranet Zone. If the URL
includes an IP address, the scanner will be connected
using the Internet Zone.
In Internet Explorer, in the "Tools" menu, "Internet
Options", try the following settings for the corre-
sponding zone.
To enable "Active scripting", set in one of the fol-
lowing ways:
In the [Security] tab, set the required "Security
level for this zone" to "Medium".
In the [Security] tab, select the [Custom level]
button. Then, set the "Scripting", "Active
scripting" to "Enable".
If connecting via the Internet zone, on the [Privacy]
tab, set the level to below "Medium High".
After the above settings have been performed, in
"Temporary Internet Files" or "Browsing history",
press the [Delete cookies] button to delete all tempo-
rary internet files.
Press the startup button to start the scanner.
Set the proxy server to not be used.
Open the "Internet Options" in the "Tools" menu of
Internet Explorer, then press the [LAN settings] but-
ton in the [Connections] tab and remove the check
from the "Use a proxy server for your LAN (These
settings will not apply to dial-up or VPN connec-
tions)." option.
Check if SSL is enabled on the "Admin Network"
screen.
For more details, refer to
Network" (page 88).
Check the specified port number on the "Admin Net-
work" screen.
For more details, refer to
Network" (page 88).
Action
"4.7.2 Setting the Admin
"4.7.2 Setting the Admin