Fujitsu 6010N - fi - Document Scanner Operator's Manual page 590

Code
11040005
11080001
11090001
110B0001
110B0002
110B0004
110B0100
110B0101
552
Message
Insufficient free space in the
designated network folder.
Number of user data stores has
reached the maximum allowed.
New users may not login until
the old user data stores are
deleted.
Application could not be
started. System restored to last
known good state. Contact a
system administrator.
Search has timed out. Contact a
system administrator.
Not connected to the network.
LDAP server is busy.
LDAP server response error.
LDAP server access failed.
Check that the LDAP access
settings and LDAP server
settings are correct.
Action
Ensure the free space requirements are
met, and try again.
To have the user data store cleared, contact
a system administrator.
Clearing the user data store is not an
undoable action.
"Clearing the User Data Store" (page 170)
System or user settings were restored at
system restart.
Contact a system administrator.
The administrator should check the restored
system or user settings.
Contact a system administrator to check
the time of the search timeout.
"4.7.8 Setting the Login LDAP Server"
(page 100)
Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than from a machine in the same
server as network printer. If the system
network is not operating properly, refer to
"Failure to connect to a server using its IP
address" (page 461) for further solutions.
Try the following:
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 456)
Contact a system administrator to have
the server status checked.
Try the following:
Contact a system administrator to check
whether the LDAP server is available.
Enter a valid user name and password.
Try the following:
Contact a system administrator to check
whether the LDAP server is available.
Enter a valid user name and password.