Fujitsu 6010N - fi - Document Scanner Operator's Manual page 598

Code
12030001
12030002
12030005
12030006
12030007
1203000A
1203000C
1203000D
560
Message
Cannot find the network printer
path.
Access to network printer was
refused.
Network is busy. Try again
later.
User name or password may be
incorrect.
Not connected to the network.
Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Specified user is no longer able
to login to this network printer.
Specified password is no longer
valid for this network printer.
Action
Try the following:
Check that the LAN cable of the scanner
and print server is connected properly.
Contact a network administrator to
check that the print server is working
properly.
Check that the spooler is operating
properly.
Contact a system administrator to check
that the scanner IP address and network
printer settings are correct.
"8.3 Network Connection
Troubleshooting" (page 456)
Contact a server administrator to find out if
an access permit has been set.
Wait for a while, and try again.
Re-enter the user name and password.
Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than from a machine in the same
server as network printer. If the system
network is not operating correctly, refer to
"Failure to connect to a server using its IP
address" (page 461) for further solutions.
Close unneeded network connections, then
try specifying the desired network path
again.
Try the following:
Login a with different account.
Contact a network administrator to have
the account validated.
Try the following:
Login a with different account.
Contact a network administrator to have
the password validated again.