Fujitsu 6010N - fi - Document Scanner Operator's Manual page 401

The following properties can be set.
HINT Single line of text
Multiple lines of text
Choice
Number
Currency
Date and Time
Yes/No
Person or Group
Hyperlink or Picture
9. Select if existing files with the same name are to be overwritten.
The default setting is [No].
If a file name already exists, the existing file will not be overwritten and the scanned data
will be lost. Whether or not the file was successfully saved can be checked in the user log.
For more details about accessing the user log, refer to
410).
10. Press the [Scan] button.
When [Scan Viewer] is Off, this will be a [Scan&Save] button.
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding skipped
blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the maximum
number of scanned pages is reached.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to
in the Scan Viewer" (page
[Scan Viewer] is initially "On".
HINT
When the [Scan&Save] button is pressed (when [Scan Viewer] is "Off"),
after the last page is displayed on the "Scanning" screen, the scan data is
saved, and the touch panel screen returns to the "Main Menu".
For more details, refer to
(page
11. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to
the Scan Viewer" (page
6.8 Saving the Scanned Data in a SharePoint Folder
405).
"6.10 Enabling/Disabling the Scan Viewer"
402).
405).
fi-6010N Network Scanner Operator's Guide
"6.12 Checking the User Log" (page
"6.11 Editing the Scanned Data
"6.11 Editing the Scanned Data in
6
363