Fujitsu 6010N - fi - Document Scanner Operator's Manual page 125

4. Press the [OK] button.
The information entered is set.
If the IP address is the same as one already in use, network communica-
HINT tion problems will occur. In this case, try the following steps:
1. Disconnect the LAN cable, and press the [Shutdown] button on the
2. Reboot the scanner with the LAN cable disconnected, and enter a
3. Re-connect the LAN cable to the scanner.
When DHCP is set to "On", the following scanner settings are assigned
by the DHCP server:
Even if DNS or WINS server is set, priority is given to the scanner set-
tings over the DHCP settings.
The connection will be lost if the scanner's IP address is changed via the
network interface. If connecting via an IP address, to continue with other
settings, login to the network interface again using the new IP address.
4.7 Using the Network Settings Menus
touch panel to turn the scanner off.
nonduplicate IP address.
IP Address
Subnet Mask
Default Gateway
DNS Server
WINS Server
Domain Suffix
fi-6010N Network Scanner Operator's Guide
4
87