Fujitsu 6010N - fi - Document Scanner Operator's Manual page 519

Take the following precautions when scanning plastic cards (for
ATTENTION example ID cards).
In Scan Settings, set the Multifeed Setup to [None]. For more details
about Multifeed Setup, refer to
and Length)" (page
Place one card at a time into the ADF paper chute.
Cards must be fed through the ADF in portrait mode, as in the fol-
lowing figure.
Cards should be placed face down in the ADF paper chute.
Embossed cards should be placed with the raised lettering side
down.
Cards should be of the following specifications:
ISO7810-compliant, Type ID-1 cards
Width × Length: 2.1 × 3.4 in / 54 × 86 mm
Thickness: 0.03 ±0.003 in / 0.76 ±0.08 mm
Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride ace-
tate)
Cards that are excessively stiff may not be fed smoothly by the ADF.
Cards that have become dirty from handling should be wiped clean
before scanning.
"6.9.17 Multifeed Detection (Layer
399).
fi-6010N Network Scanner Operator's Guide
A
LANDSCAPE
481