Fujitsu 6010N - fi - Document Scanner Operator's Manual page 173

1. Enter a User Name.
This may be up to 256 characters long.
2. Enter a Password.
This may be up to 256 characters long (case sensitive).
3. Press the [OK] button.
When the user name and password are valid, or if login is not required, the network
tree expands and computer names are displayed under the selected domain.
5. Select a computer
If login is required, an "Authentication" screen appears.
If login is not required, the network tree expands and computer names are displayed
under the selected domain.
1. Enter a User Name.
This may be up to 256 characters long.
2. Enter a Password.
This may be up to 256 characters long (case sensitive).
3. Press the [OK] button.
When the user name and password is valid, or if login is not required, the network tree
expands and network folders are displayed under the selected computer name.
6. Select a network folder
The selected folder will be opened to show any sub-folders, which themselves may be
selected in turn (up to seven levels deep, including the parent domain).
7. Press the [Select] button.
The selected network folder is added to the network folder list.
The default network folder alias will be the same as the alias selected
HINT
from the network tree. For details on changing the folder alias, refer to
"Renaming a Network Folder" (page
Select a readable and writable network folder.
The "Network" tree can show up to 400 domain, computer, and network
folder items on the touch panel screen, and up to 10,000 items on the
Admin Tool screen.
While the network tree is displayed, enter characters to be searched for in
the "Find" field, and press the [Back] or [Next] button to focus the network
tree on the specified characters.
4.7 Using the Network Settings Menus
.
.
fi-6010N Network Scanner Operator's Guide
141).
4
135