Processing A Job - Fujitsu 6010N - fi - Document Scanner Operator's Manual

6.14 Processing a Job

This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the "Job Menu" screen, press the [Job] button.
HINT
The "Message Screen" appears.
HINT
When you are included in multiple job groups, the "Job Menu" screens can
be switched by using the job menu switch buttons.
If either the title or message is not set in [Message Screen] on the "Job
Details" window, even if the [Message Screen] button is set to [On], the
"Message Screen" will not be shown. For more details, refer to
"4.11.2 Setting a Job Sequence" (page
If "Off" is selected for the [Message Screen] button, scanning is started
without showing the "Message Screen", and the job is processed. For
more details, refer to "6.14.1 Enabling/Disabling the Message Screen"
(page 417).
When the [Message Screen] button is disabled, whether or not the "Mes-
sage Screen" is shown depends on the settings configured by the admin-
istrator.

6.14 Processing a Job

185).
fi-6010N Network Scanner Operator's Guide
6
Step 4 of
413