Fujitsu 6010N - fi - Document Scanner Operator's Manual page 286

Port Number
Enter a port number to be used for communication with the LDAP server. Input a value
between 1 and 65535.
The default values are as follows.
If the [Use SSL] checkbox is selected
The default value is "636" if [Active Directory] or [Other LDAP Server] is selected.
The default value is "3269" if [Active Directory Global Catalog] is selected.
If the [Use SSL] checkbox is not selected
The default value is "389" if [Active Directory] or [Other LDAP Server] is selected.
The default value is "3268" if [Active Directory Global Catalog] is selected.
LDAP Server Authentication
Enter an authorized user name and password when searching for users to be logged in to
the LDAP server, only when [Other LDAP Server] is selected for "LDAP Server Type".
Authorized User (DN)
Alphanumeric characters and symbols can be used for an authorized user name.
Enter an authorized user name in DN format.
If left blank, the user is authenticated as an anonymous user.
Password
Alphanumeric characters (case sensitive) and symbols can be used for a password.
This may be up to 255 characters long.
Login User Attributes
Select login user attributes.
Select whether to search for LDAP server login users by either "uid" or "cn", only when
[Other LDAP Server] is selected for the "LDAP Server Type".
Search Base (DN)
Enter a character string to be used as the LDAP search base.
LDAP entry under the string entered here is set as the search target.
This may be up to 255 characters long.
Maximum Results
Select the maximum number of LDAP search results to be displayed.
The default is 1000.
Search Timeout
Select the timeout time of LDAP search.
The default is 60 sec.
248