Fujitsu 6010N - fi - Document Scanner Operator's Manual page 263

Function
Scanner Settings
Update
Automatic Update
Status Monitoring
Used to...
Create scanner settings in the Central
Admin Server, and upload/release them
to multiple scanners.
The contents of the scanner settings can
be changed per settings group.
Update Call
Scanner settings can be applied to mul-
tiple scanners at once.
Automatically update scanner systems,
security, installed options, scanner set-
tings, and Add-ins, on the date specified
on the scanner side. Updates can be per-
formed on a specified date even in an
environment where update calls or Wake-
On-LAN cannot be used, because the
scanner is automatically resumed and
updated even when in standby mode.
Monitor the error status, operating status,
and consumable part status for each scan-
ner.
Normalcy Monitoring
Monitoring of scanner errors can be
performed in the Central Admin Server.
Errors can be notified of to the Central
Admin Console. If an error occurs, a
notification e-mail can be sent to the
administrator.
Operating Status Monitoring
The power status and login status of
each scanner can be displayed in the
Central Admin Console.
Consumables Monitoring
When a consumable part needs to be
replaced in the near future, a notifica-
tion can be displayed in the Central
Admin Console.
fi-6010N Network Scanner Operator's Guide
5.1 Function List
See...
"5.8 Monitoring and
Maintaining the iScan-
ner Network" (page
263)
"5.11 Updating the
Scanner System Set-
tings" (page 271)
"5.13 Viewing the
Update Status Lists"
(page 278)
"4.7.3 Setting a Central
Admin Server" (page
90)
"5.11 Updating the
Scanner System Set-
tings" (page 271)
"5.6 Setting the Central
Admin Server" (page
244)
"5.7 Setting Scanner
Configuration" (page
254)
"5.14 Viewing the
Scanners Operating
Status" (page 281)
225
5