Sending A Fax With Paperport - ScanSoft PAPERPORT 3.6 Manual

The dotted rectangle shows
what happens as you drag
the selected stack.
When the Fax icon is
highlighted, release the
mouse button.
S F P
ENDING A AX WITH
To send a fax with PaperPort, your computer must have:
• A fax modem.
• Fax software for your fax modem. If you have fax software that
PaperPort recognizes, it automatically displays a Fax link icon on the
Link Bar, and no special setup is needed. To add other fax software to
the Link Bar, see Chapter 8, "Using PaperPort Links."
The following example shows you how to send a scanned item as an
electronic fax using the drag-and-drop method. For example, you have
scanned several invoices and stacked them, and you now want to fax them
to your bookkeeper. This section shows how drag and drop works.
To send a fax from PaperPort:
1. On the PaperPort Desktop, select the stack that you want to send,
and hold down the mouse button.
2. While holding down the mouse button, drag the stack onto the Fax
icon on the Link Bar, as shown in the following figure.
P
APER ORT
Getting the Most from PaperPort 13