Link Messages - ScanSoft PAPERPORT 3.6 Manual

L M
INK ESSAGES
PaperPort has detected that the support file MAXLINK.DLL has
been overwritten by a recently installed link. Please install PaperPort
again to install the correct MAXLINK.DLL.
If you install a supported linked application that has an older version of
MAXLINK.DLL, it may overwrite the newer version in the PaperPort
directory. In this case, simply reinstall the PaperPort software, and the
correct version of this file will be properly installed.
Your OCR software was not able to process the selected pages.
This error can be caused by a low memory condition or a problem with
the OCR software. For information about making more memory
available, see "Memory Messages." Try scanning using either the Article
or Letter scan mode, and then processing it with the OCR link. If the
problem persists, reinstall your OCR software.
PaperPort cannot use the link <Linkname> because it is either
damaged or incompatible with the current software version.
Try reinstalling the linked application. If the problem persists, contact
Visioneer to see if an update is available for the link.
Please specify the name of your Fax software before using the
Fax link.
You must select the fax software driver in the PaperPort Preferences
dialog box.
To select the fax software driver:
1. From the Edit menu, choose Preferences.
2. Click the Fax icon under Category.
3. Select a fax driver, and click OK.
138 A: Messages