Table of Contents
Advertisement
Scanned images have unwanted lines through them.
Calibrate the scanner. The installation guide that you received with your
scanner explains the calibration process. If this does not get rid of
unwanted lines, there may be ink, glue, white-out, or some other substance
on the scanner's image sensor. You can clean it by feeding a fax machine
cleaning sheet straight through the scanner just as you would when scanning
a paper. These sheets are available at most office supply stores.
P
P
RINTING
ROBLEMS
Highlighter annotations are opaque when printed on HP LaserJet 4
printers.
The LaserJet 4 printer driver has two graphics modes: HP-GL/2 and
Raster. Change the graphics mode to Raster.
To change the graphics mode:
1. From Program Manager, open the Printers Control Panel.
2. Select the LaserJet 4 driver.
3. Click Settings, and then click Options.
Images are reduced in size.
If necessary, PaperPort automatically reduces the size of the image to fit it on
the page. For example, if you scan an 8.5 x 11 inches (21.59 x 27.94 cm)
standard page, then the image in PaperPort will be 8.5 x 11 inches (21.59 cm
x 27.94 cm) from edge to edge. However, most printers cannot print right up
to the edge of the paper; therefore, to get the image to fit into this "printable"
area, you must slightly reduce the size of the image.
Printing Problems
147
Advertisement
Table of Contents
