Displaying And Hiding The Annotation Tool Bar; Zooming In Or Out On A Page; Fitting An Item Into A Window - ScanSoft PAPERPORT 3.6 Manual

D
Using the View menu, you can display or hide the Annotation Tool Bar.
To display or hide the Annotation Tool Bar:
1. From the View menu, choose Tool Palette. A checkmark means that
2. These choices are "toggles." Choose the appropriate command to
Z
In Page View, you can zoom in to display the details of a page, or zoom
out to make the page smaller on the screen. When you zoom in, the page's
contents are larger on the screen and are easier to see. By zooming out you
can see more of the page.
To zoom in or out on a page:
1. Display the page in Page View.
2. From the View menu, choose Zoom In or Zoom Out, or click the
F
An image of an item will often be larger than the Page View window. To
fit the entire image into the Page View, you can use the Fit To Window
command.
44 3: Working on the PaperPort Desktop
H
ISPLAYING AND IDING THE
the Tool Bar will be displayed.
display or hide the visual element on the PaperPort Desktop.
I O
OOMING N OR UT ON A
plus (+) or minus (-) magnifying glass buttons on the Zoom
Navigator. The page magnification changes as you click the buttons
or repeat the Zoom commands.
The actual page magnification is shown on the Status Bar.
NOTE: Zooming in or out does not change the actual size of the page.
To see the page at its actual size (100 percent) choose Actual Size from
the View menu or click Actual on the Zoom Navigator.
I
ITTING AN TEM INTO A
A T
NNOTATION OOL
P
AGE
W
INDOW
B
AR