Bgpkeepalives - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual

JunosE 11.3.x System Event Logging Reference Guide
Debug
Filter 1
Filter 2

bgpKeepAlives

Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
Filter 3
Filter 4
Filter 5
Filter 6
40
BGP IPv6 indirect next-hop events
router—See description of the bgpRoutes router filter for information about this filter
remote-ipv6-address—Matches on the IPv6 address of the BGP indirect next-hop
BGP keepalive messages
None
None
None
None
Keepalive message received with unexpected additional data after header
Keepalive message received; keepalive message sent
None
None
access-class—This filter is not currently supported
peer—See description of the bgpRoutes peer filter for information about this filter
route-map—This filter is not currently supported
router—See description of the bgpRoutes router filter for information about this filter
in—Matches on traffic coming into the router
out—Matches on traffic going out of the router
NOTE: Send messages are logged to the bgpKeepAlives log when a message
is added to the send queue. A debug message is logged in to the
bgpConnections log when the message is actually passed to TCP.
Copyright © 2010, Juniper Networks, Inc.