Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 190

JunosE 11.3.x System Event Logging Reference Guide
Error
Warning Log
Notice Log
Info
Debug
Filter
ospfElectDr
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
166
File system errors; image checksum failure; POST test failure; unexpected software error;
scheduled reload cancelled due to ongoing NVS flush; image not found or invalid; core
dump host connect failure; SRP synchronization failure notification; I/O module mismatch
or missing; NVS configuration errors
OsTask client failed to initialize; file system capacity low (15%); heap utilization high
(85%); crash dump save failure; unknown reset type; image loader failures (will retry);
boot ROM programming failure; hardware upgrade necessary notification; NVS config
file read or write errors; release file invalid
OsAppRegistrar client names; OsAppRegistrar state change; version display; last reset
type; file system condition abatement; POST start or done; NVS config file initialized or
converted; scheduled reload notification; heap utilization abatement (75%); file system
release file copy notification; erasing boot ROM notification; core dump notification and
status; NVS config boot status (factory defaults, running, file)
Image loader request; image loader success; SC-srpIc mailbox client up; POST test
passed; NVS config cache enable, disable, flush, or termination; release path notification;
diag-level diagnostic feature is also applicable to standby SRP
High-frequency debug messages (enabled with various build defines); cached file hit,
miss, or close; image loader frame retry; NVS config cache flush status
None
OSPF designated router (DR) election
None
None
None
None
None
DR election events
None
None
Copyright © 2010, Juniper Networks, Inc.