Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 114

Software for e series broadband services routers system event logging reference guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04:
Table of Contents

Advertisement

JunosE 11.3.x System Event Logging Reference Guide
icmpv6Traffic
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
icrPartitionManager
Description
90
router—Logs events on a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
remote-ip-address—Logs events for a remote address
ipAddress—Address of remote system for which you want to log messages
ipAddressMask—Mask for the remote address
ICMPv6 frame transmit or receive
None
None
None
None
Packets of unknown types, invalid headers, with header errors
None
Failures due to checksum errors, unsupported
All ICMPv6 transmit or receive events
[ remote-ipv6-address ipv6Address ]
remote-ipv6-address—Logs events for packets arriving from or going to a specified
IPv6 address
ipv6Address—IPv6 address of remote system for which you want to log messages
router virtualRouterName [ address ipv6Address ]
router—Logs events on a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
address—Logs events on a specific IPv6 address
ipv6Address—Address of remote system for which you want to log messages
Interchassis Redundancy Partition Manager
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents