Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 121

Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
ipEngineering
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
ipflowstats
Description
Copyright © 2010, Juniper Networks, Inc.
None
None
Failure in operations such as adding, removing, or deleting interfaces or distributing routing
tables to line modules
Errors such as attempting to configure something that is not supported on a module, or
routing table memory is approaching 80 percent full
Something unexpected happened; for example, an interface was deleted twice or, internal
to the software, connections between IC and SRP were deleted twice
Completion status of a user command (for example: " IS command succeeded" )
An engine or agent that corresponds to a virtual router is added or deleted; an interface
is added or deleted
None
IP Engineering
None
None
None
None
None
None
Notifying AAA about duplicate prefix: profileHandle ( authId: authId, rtr uid: router )
None
None
J-Flow statistics
Chapter 10: I Commands
97