Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 131

ipv6General
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
Copyright © 2010, Juniper Networks, Inc.
virtualRouterName—Name of virtual router for which you want to log events
access-list—Logs events for a specific access list
accessListName —Name of access list for which you want to log events
access-element-id—Logs events for a specific element ID
idNumber—Element ID number for which you want to log events; the element ID is
automatically assigned for access-list rules that you explicitly create and is shown by
issuing the show ipv6 access-list detail command
IPv6 general
None
None
None
License-related errors (for example, attempting to configure IPv6 without configuring
the license first); error in sending interface up or down events to IPv6
Primary IPv6 address on an interface is not found
None
None
None
interface interfaceType interfaceSpecifier
interface—Logs events for a specific interface
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
router virtualRouterName [ interface interfaceType interfaceSpecifier ]
Chapter 10: I Commands
107