Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 68

JunosE 11.3.x System Event Logging Reference Guide
Debug
Filter 1
Filter 2
44
Redistributed route added to, removed from, or modified in Loc-RIB; advertisement for
a given prefix received; withdraw for a given prefix received; local route-target-filtering
route added to or removed from prefix in addressFamily
access-class accessClassName [ route-map routeMapName routeMapOptions |
filtering-router filteringRouterName filteringRouterOptions | in | out ]
access-class—Logs events for traffic that matches a specific access class
accessClassName —Name of the access class for which you want to log events
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—filtering-router filteringRouterName
filteringRouterOptions | in | out
filtering-router—Logs events only if the access class or route map are defined on a
specific virtual router
filteringRouterName—Virtual router where the access class or route map or both are
defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the access class, route map, or virtual router
out—Matches on traffic sent out of the access class, route map, or virtual router
peer peerIpAddress | peerIpv6Address
[ access-class accessClassName accessClassOptions |
route-map routeMapName routeMapOptions |
filtering-router filteringRouterName filteringRouterOptions | in | out ]
peer—Logs events for traffic that matches a specific peer
peerIpAddress—IP address of the peer for which you want to log events
peerIpv6Address—IPv6 address of the peer for which you want to log events
access-class—Logs events for traffic that matches a specific access class
accessClassName—Name of the access class for which you want to log events
accessClassOptions—In the following format—filtering-router filteringRouterName
filteringRouterOptions | in | out
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—filtering-router filteringRouterName
filteringRouterOptions | in | out
filtering-router—Logs events only if the peer, access class or route map are defined on
a specific virtual router
Copyright © 2010, Juniper Networks, Inc.