Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 220

JunosE 11.3.x System Event Logging Reference Guide
Filter
pimIpv6HelloRcvdLog
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
196
None
Protocol Independent Multicast (PIM) hello messages received
None
None
None
None
None
None
Short description of the received PIM hello messages
Complete printout of the received PIM hello messages
interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType
interfaceSpecifier ]
interface-ipv6-address—Logs events for a specific interface
ipv6-address—Specifies that you will identify the interface by entering an IPv6 address
ipv6Address—IPv6 address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
router virtualRouterName [ interface-ipv6-address [ ipv6-address ipv6Address |
unnumbered interfaceType interfaceSpecifier ] ]
router—Logs events for a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
interface-ipv6-address—Logs events for a specific interface on the virtual router
Copyright © 2010, Juniper Networks, Inc.