Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 202

JunosE 11.3.x System Event Logging Reference Guide
Filter 2
ospfv3General
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
178
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of the unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered
interfaceType interfaceSpecifier ] ]
router—Logs events for a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
interface-ip-address—Logs events for a specific interface on the virtual router
ip-address—Specifies that you will identify the interface by entering an IP address
ipAddress—IP address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of the unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide, .
OSPFv3 general
None
None
None
Error enabling or disabling OSPFv3; allocation errors
State change errors (for example, OSPFv3 could not be enabled); errors creating or
destroying an area, an OSPFv3 range, or a virtual link
OSPFv3 enabled or disabled; BFD enabled or disable on an OSPF interface
Copyright © 2010, Juniper Networks, Inc.