Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 213

pimAutoRPSentLog
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
pimBsrRcvdLog
Description
Emergency
Alert
Copyright © 2010, Juniper Networks, Inc.
ip-address—Specifies that you will identify the interface by entering an IP address
ipAddress—IP address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
Protocol Independent Multicast (PIM) AutoRP messages sent
None
None
None
None
None
None
Short description of the sent PIM AutoRP packets
Complete print of the sent PIM AutoRP packets
interface-ip-address—See description of the pimAutoRPRcvdLog interface-ip-address
filter for information about this filter
router—See description of the pimAutoRPRcvdLog router filter for information about this
filter
Reception of PIM-SM IPv4 BSR messages (BSM and C-RP-Advs)
None
None
Chapter 15: P Commands
189