Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 193

ospfHelloPktsSent
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
Copyright © 2010, Juniper Networks, Inc.
interfaceType—Type of the interface for which you want to log events (for example,
atm or fastEthernet)
interfaceSpecifier—Location of the interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
Sending of hello messages on OSPF-enabled interfaces
None
None
None
None
None
None
None
Information about hello messages sent on OSPF-enabled interfaces (ip
source/destination, length)
router virtualRouterName [interface interfaceType interfaceSpecifier ]
router—Logs events for a specific virtual router
virtualRouterName—Name of the virtual router for which you want to log events
interface—Logs events on a specific OSPF-enabled interface on the virtual router
interfaceType—Type of the interface for which you want to log events (for example,
atm or fastEthernet)
interfaceSpecifier—Location of the interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
Chapter 14: O Commands
169