Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 69

Filter 3
Filter 4
Copyright © 2010, Juniper Networks, Inc.
filteringRouterName—Virtual router where the peer, access class or route map or both
are defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the peer, access class, route map, or virtual router
out—Matches on traffic sent out of the peer, access class, route map, or virtual router
route-map routeMapName
[ filtering-router filteringRouterName filteringRouterOptions | in | out ]
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
filtering-router—Logs events only if the route map is defined on a specific virtual router
filteringRouterName—Virtual router where the route map is defined
filteringRouterOptions—in | out
in—Matches on traffic coming into the route map or virtual router
out—Matches on traffic sent out of the route map or virtual router
router virtualRouterName [ access-class accessClassName accessClassOptions |
route-map routeMapName routeMapOptions |
filtering-router filteringRouterName filteringRouterOptions |
peer peerIpAddress peerOptions | in | out ]
router—Logs events for traffic on a specific virtual router
virtualRouterName—Name of virtual router
access-class—Logs events for traffic that matches a specific access class on the
specified router
accessClassName—Name of the access class for which you want to log events
accessClassOptions—In the following format—route-map routeMapName
routeMapOptions | virtual-router virtualRouterName virtualRouterOptions | in | out
route-map—Logs events for traffic that matches a specific route map
routeMapName—Name of route map for which you want to log events
routeMapOptions—In the following format—virtual-router virtualRouterName
virtualRouterOptions | in | out
filtering-router—Logs events only if the access class or route map is defined on a specific
virtual router
filteringRouterName—Virtual router where the access class or route map is defined
filteringRouterOptions—In the following format—in | out
peer—Logs events for traffic that matches a specific peer
peerIpAddress—Address of the peer for which you want to log events
Chapter 4: B Commands
45