Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 212

JunosE 11.3.x System Event Logging Reference Guide
pimAutoRPRcvdLog
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
188
pppStateMachine on page 205
profileMgr on page 206
Protocol Independent Multicast (PIM) AutoRP messages received
None
None
None
None
None
None
Short description of received PIM AutoRP packets
Complete print of received PIM AutoRP packets
interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier
]
interface-ip-address—Logs events for a specific interface
ip-address—Specifies that you will identify the interface by entering an IP address
ipAddress—IP address of interface for which you want to log events
unnumbered—Specifies that the interface is unnumbered
interfaceType—Type of interface for which you want to log events
interfaceSpecifier—Location of unnumbered interface in the appropriate format
NOTE: For information about interface types and specifiers, see Interface
Types and Specifiers in JunosE Command Reference Guide.
router virtualRouterName [ interface-ip-address [ ip-address ipAddress | unnumbered
interfaceType interfaceSpecifier ] ]
router—Logs events for a specific virtual router
virtualRouterName—Name of virtual router for which you want to log events
interface-ip-address—Logs events for a specific interface on the virtual router
Copyright © 2010, Juniper Networks, Inc.