Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 192

JunosE 11.3.x System Event Logging Reference Guide
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
ospfHelloPktsRcvd
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
168
Error enabling or disabling OSPF; allocation errors
State change errors (for example, OSPF could not be enabled); errors creating or
destroying an area, an OSPF range, or a virtual link; error enabling OSPF protocol
OSPF enabled or disabled; BFD enabled or disable on an OSPF interface
Event for a dynamic neighbor
Bouncing adjacency with a neighbor
interface-ip-address—See description of the ospfElectDr interface-ip-address filter for
information about this filter
router—See description of the ospfElectDr router filter for information about this filter
Processing of hello messages received on OSPF-enabled interfaces
None
None
None
None
Invalid packet, hello parameters mismatch (area, network, hello and dead intervals,
version, md5 digest)
None
None
Received hello information (ip source/destination, length)
router virtualRouterName [ interface interfaceType interfaceSpecifier ]
router—Logs events for a specific virtual router
virtualRouterName—Name of the virtual router for which you want to log events
interface—Logs events on a specific OSPF-enabled interface on the virtual router
Copyright © 2010, Juniper Networks, Inc.